This manual confers no industrial property rights or any rights of any other kind
nor does it confer any patent licenses. Mitsubishi Electric Corporation cannot b
held responsible for any problems involving industrial property rights which may
occur as a result of using the contents noted in this manual.
Warranty
Mitsubishi will not be held liable for damage caused by factors found not to be
the cause of Mitsubishi; opportunity loss or lost profits caused by faults in the
Mitsubishi products; damage, secondary damage, accident compensation
caused by special factors unpredictable by Mitsubishi; damages to products
other than Mitsubishi products; and to other duties.
For safe use
This product has been manufactured as a general-purpose part for general
industries, and has not been designed or manufactured to be incorporated in
a device or system used in purposes related to human life.
Before using the product for special purposes such as nuclear power, electric
power, aerospace, medicine or passenger movement vehicles, consult with
Mitsubishi Electric.
This product has been manufactured under strict quality control. However
when installing the product where major accidents or losses could occur if th
product fails, install appropriate backup or failsafe functions in the system.
•
•
•
HEAD OFFICE
HIMEJI WORKS
: TOKYO BUILDING, 2-7-3 MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310
JAPAN
: 840, CHIYODA CHO, HIMEJI, JAPAN
*1 Only the FX3G PLC supports 38400 bps.
Item Specification
Transmission
standard Conforming to RS-232C
Type of isolation Photocoupler isolation
Transmission
distance
15m (49’2") or less
Connection method 9-pin D-Sub connector (male)
Number of occupied
I/O points
0 point (This number is not related to the maximum number of
input/output points of the PLC.)
Communication
method Full-duplex
Baud rate
Computer Link, Non-Protocol Communication:
300/600/1200/2400/4800/9600/19200/38400*1bps
Programming Communication:
9600/19200/38400/57600/115200bps
Communication
format
Computer Link (dedicated protocol: format 1/format 4),
Non-Protocol Communication, and Programming
communication
LED display:
LED color
Power: green, RD: red, SD: red